HP StorageWorks 6000 Virtual Library System - Manual (Page 258)

Extending a VLS6600 Node from the Rack
WARNING!
To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately
stabilized before extending a node from the rack.
WARNING!
Be careful when pressing the rail-release levers and sliding the component into or out of the rack. The
sliding rails could pinch your fingertips.
To extend a node from the rack:
1. Pull down the quick release levers (1) on each side of the server.
2. Extend the node on the rack rails until the node rail-release latches engage.
Figure 72 Extending the node from the rack
.
Component Replacement 258