HP StorageWorks 6000 Virtual Library System - Manual (Page 232)

Status Description Item
Green = Power supply health is normal.
Amber = Power redundancy failure. To identify
the component in a degraded state, refer to
HP
Systems Insight Display LEDs and Internal Health
LED Combinations
.
Red = Critical power supply failure. To identify
the component in a critical state, refer to
HP
Systems Insight Display LEDs and Internal Health
LED Combinations
.
External health LED (power supply) 3
Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active.
View the LEDs on the RJ-45 connector for status
by referring to
Rear Panel LEDs and Buttons .
NIC 1 link/activity LED 4
Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active.
View the LEDs on the RJ-45 connector for status
by referring to
Rear Panel LEDs and Buttons .
NIC 2 link/activity LED 5
Green = System is on.
Amber = System is shut down, but power is still
applied.
Off = Power cord is not attached, power supply
failure has occurred, no power supplies are
installed, or facility power is not available.
Power On/Standby button and system power
LED
6
HP Systems Insight Display and LEDs
Component Identification 232