Viewing the job history – HP StorageWorks 6000 Virtual Library System User Manual
Page 114
3.
Select Job Reporting from the expanded list.
You can customize the following defaults:
•
Refresh time for the display (1 to 15 minutes)
•
Duration of the job status graphs to display (1 to 90 days)
•
Reporting data retention period (1 to 90 days)
•
Duration of the CSV format export file (1 to 90 days)
•
Name for the CSV format export file
You can also create a pre-defined custom view based on the locations you choose:
1.
Select a location category.
2.
Select the specific locations of interest from the Available Locations box. You can select multiple
devices by using Ctrl+click.
3.
Using the >> button, or by double-clicking, move the locations of interest into the Selected Locations
box. These are the locations that will display in the report. You can use << button to remove
locations from the Selected Locations box.
4.
Select another location category and repeat steps 2 and 3.
5.
Enter a name for this view in the Create a New View field.
6.
Select Create View. This view is now available as a selection in the Views list on the Job History
screen.
To update an existing view, select it from the Update existing view list, adjust the selected locations,
rename the view (if desired) in the name field, and select Update View. Select Delete View if you want
to remove that view from your pre-defined options.
At any time, you can change any of these default settings.
Viewing the Job History
The Job History screen displays the history of the completed library jobs. It defaults to SAN jobs only,
and displays the number of days set as the default on the Configuration screen.
The job history table displays for each job:
•
Barcode
•
Start and end times
•
Size in MB
•
Data transfer time
•
Total processing time
•
Transfer rate
•
Source and target locations
•
The node the job is running on
•
Completion status
•
Compression (yes or no)
The performance graph maps the MB per second against the time it took the jobs to complete.
To change the jobs included in the job history report, select a View previously created on the
Configuration screen. If you haven't set up any views:
Automigration/Replication
114