HP StorageWorks 6000 Virtual Library System - Manual (Page 203)

Usage 1 Command
Creates a new library with the specified maximum number of cartridge slots, in-
put/export ports, and tape drives. Where the options are:
-a - Node ID of the node on which the library emulation will reside (0, ...)
(required)
-l - LUN number to assign to library (-1 to 128) (optional)
-n - Maximum number of tape drives (required)
-p - Product (spaces allowed) (MSL6000, ...) (required)
-pm - FC port to which this library is mapped (0, 1, ...) (required)
-pt - Maximum number of input/export ports (required)
-r - Revision (0430, ...) (required)
-sl - Maximum number of cartridge slots (required)
-t - Library type name (required)
-v - Vendor (HP, ...) (required)
-y - Library type to emulate (2051, ...) (required)
-h - Displays command usage information (optional)
createLibrary
Returns a list of the libraries defined on the VLS. getLibs
Returns a summary of the specified library. Where the options are:
-a - Name of library (Library_0, ....) (required)
-h - Displays command usage information (optional)
getLib
Returns a summary of the slot status for each defined library (open:used:total). getLibOpenSlots
Deletes the specified library from the VLS. This operation takes several minutes to
perform. Where the options are:
-a - Node number on which the library emulation resides (0, ...) (optional)
-f - Force. This parameter is ignored and is present only for backward compatibility
(optional)
-l - LUN number of the library to delete (required)
-h - Displays command usage information (optional)
destroyLib
Returns a list of all tape drive emulation types available. Displays each tape drive
emulation's name, type, product, revision, and vendor information. Where the
options are:
-l - List only licensed types (optional)
-h - Displays command usage information (optional)
getTapeTypes
HP StorageWorks 6000–series Virtual Library System User Guide 203