HP StorageWorks 6000 Virtual Library System - Manual (Page 212)

Usage 1 Command
Adds an E-mail address and desired report formatting to the E-mail notification
alert settings. Where the options are:
-a - E-mail address (required)
-c - VLS IP address (required)
-s - Severity (1-Error, 2-Warning, 4-Info, or 8-Unknown) (optional)
-y - E-mail type (1-Long with attachment, 2-Long, 4-Short, or 8-Reports)
(optional)
-h - Displays command usage information (optional)
-f - Notification frequency (0-None, 1-Daily, 2-Weekly, 3-Bi-weekly, or
4-Monthly) (optional)
addEmail
Returns the report settings for each E-mail address configured for notification alerts. getEmail
Deletes the specified E-mail address from the E-mail notification alert settings.
Where the options are:
-a - E-mail address (required)
-c - VLS node IP address (required)
-f - Force. This parameter is ignored and is present only for backward compatibility
(optional)
-y - Email type (1-long with attachment, 2-long, 4-short, 8-reports,
16-configuration) (required)
-h - Displays command usage information (optional)
deleteEmail
Specifies an SNMP management console to receive SNMP traps from the VLS.
Where the options are:
-a - SNMP server IP address (required)
-c - VLS node IP address (required)
-m - Community (Public, ...) (required)
-v - Trap version (required)
-s - Severity (1-Error, 2-Warning, 4-Info, or 8-Unknown) (required)
-h - Displays command usage information (optional)
addSnmpServer
Returns the SNMP management console configuration settings for notification
alerts.
getSnmp
Deletes the specified SNMP management console from the SNMP notification alert
settings. Where the options are:
-a - SNMP server IP address (required)
-c - VLS node IP address (required)
-f - Force. This parameter is ignored and is present only for backward compatibility
(optional)
-h - Displays command usage information (optional)
deleteSnmpServer
1
= string; = number; = filename
CLI Command Set 212