HP StorageWorks 6000 Virtual Library System - Manual (Page 163)

1. If you are already in the Create Library Wizard window, click Create Tape Drives.
The Tape Drive Parameters window opens.
2. If not:
a. Click the System tab.
b. Select the library in the navigation tree to which you want to add tape drives.
c. Click Create Tape Drive in the task bar.
The Tape Drive Parameters window opens ( Figure 59 ).
Figure 59 Create Virtual Library Wizard window (5 of 12)
. 3. Select the type of physical tape drive to emulate.
4. Enter the Fibre Channel host port on which to present the tape drives in the Port Mapping box.
Only one port or port pair may be selected.
5. Click Next Step.
The next Tape Drive Parameters window opens ( Figure 60 ).
Figure 60 Create Virtual Library Wizard window (6 of 12)
.
HP StorageWorks 6000–series Virtual Library System User Guide 163