HP StorageWorks 6000 Virtual Library System - Manual (Page 286)

Diskette Drive
1. Power off the node. See Powering Off the System .
2. Use the Torx T-15 tool to press the ejection button for the diskette drive , and pull the diskette
drive out of the drive bay. See
Locating and Removing the Torx T-15 Tool (VLS6800 node only) .
Figure 99 Removing the diskette drive
.
To replace the component:
1. Insert the diskette drive into the drive bay until it seats.
2. Power on the node. See Powering on the VLS6000–series System .
DVD-CD Drive
1. Power off the node. See Powering Off the System .
Component Replacement 286