HP StorageWorks 6000 Virtual Library System - Manual (Page 242)

Status Description Item
• Green = System health is normal.
• Amber = System is degraded. To identify the
component in a degraded state, refer to the
QuickFind Diagnostic Display LEDs.
• Red = System is critical. To identify the com-
ponent in a critical state, refer to QuickFind
Diagnostic Display LEDs.
• Off = System health is normal (when in
standby mode).
External health LED 3
• Green = System is on.
• Amber = System is shut down (auxiliary
power only).
• Off = Power cord is not attached, power
supply failure has occurred, no power sup-
plies are installed, or facility power is not
available. Power On/Standby button 4
• On = Drive activity.
• Flashing = High activity on the drive or drive
is being configured as part of an array.
• Off = No drive activity.
For more information about the meaning of the
various hard drive LED illumination patterns, see
Hard drive LED combinations .
Hard drive activity LED 5
• On = Drive is part of an array and is cur-
rently working.
• Flashing = Online activity.
• Off = No online activity.
For more information about the meaning of the
various hard drive LED illumination patterns, see
Hard drive LED combinations .
Hard drive online status LED 6
• On = Drive failure.
• Flashing = Fault process activity.
• Off = No fault process activity.
For more information about the meaning of the
various hard drive LED illumination patterns, see
Hard drive LED combinations .
Hard drive fault status LED 7
See Power supply LED combinations . Power supply LEDs 8–9
Table 12 Power supply LED combinations
Status
9 Fault LED (am-
ber) 8 Power LED
(green)
No AC power Off Off
Component Identification 242