HP StorageWorks 6000 Virtual Library System - Manual (Page 110)

1. Follow steps 1 through 3 above.
2. Select Edit Availability Windows from the task bar to open that screen.
The Edit Availability Windows screen displays.
3. To delete a availability window, select Delete in the row of that policy window in the Current
Availability Windows section of the screen.
4. To add a availability window, enter the information in the Add Availability Window section of
the screen, and then select Add.
Repeat this step for as many availability windows as you need.
NOTE:
When adding multiple availability windows, you must select Add for each new availability
window or the system will not record it.
5. Select Submit.
Deleting a LAN/WAN Replication Target
1. Select the Automigration/Replication tab.
2. Expand LAN/WAN Replication Targets on the navigation tree.
3. Select the LAN/WAN replication target you wish to delete.
4. On the LAN/WAN Replication Target Details screen, select Delete on the task bar.
5. Select OK from the dialog box.
The LAN/WAN Replication Targets screen displays with the deleted target removed from the list.
Changing the LAN/WAN Replication Target Password
You may need to change the LAN/WAN replication target's password in the event of a security
breach. The following steps will stop all communication between the source and the target, and then
re-establish secure communication.
1. Change the password on the LAN/WAN replication target.
See “ Editing a LAN/WAN Replication Target ” on page 109 to reach the Edit LAN/WAN Replication
Target Settings screen. Enter a new password for the target.
2. Change the LAN/WAN replication target's password on the source to the new password.
See “ Managing a LAN/WAN Replication Library ” on page 79 to reach the Re-manage LAN/WAN
Library screen. Enter the same password you just created for the target.
Clearing the Source VLS from the LAN/WAN Replication Target
You may want to clear the connection between a source library and its LAN/WAN replication target
in order to use the target with a different source library. The target library maintains all of its default
settings in the change.
On the destination library:
1. Select the Automigration/Replication tab.
Automigration/Replication 110