HP StorageWorks 6000 Virtual Library System - Manual (Page 261)

3. After performing the replacement procedure, slide the node back into the rack:
a. Reach around the front of the node to press the rail-release levers at the front of both node
rails and slide the node into the rack.
Figure 76 Sliding the node into the rack
. b. Tighten the thumbscrews to secure the node to the rack.
Figure 77 Tightening the thumbscrews
.
Removing a VLS6100, VLS6200, or VLS6500 Node from the Rack
To remove the node from a rack:
1. Power off the node. See Powering Off the System .
2. Disconnect the cabling.
3. Extend the node from the rack. See Extending the Node from the Rack .
HP StorageWorks 6000–series Virtual Library System User Guide 261