HP StorageWorks 6000 Virtual Library System - Manual (Page 205)

Usage 1 Command
Creates a new barcode template. Where the options are:
-b - Barcode prefix to use for the barcode (up to 5 alpha characters) upper
case and/or numeric (required)
-i - Starting numeric value for the cartridges created with this template (1
to 1024) (required)
-u - Barcode suffix length. Number of digits for cartridge sequencing (1 to
16) (required)
-s - Barcode suffix to use for the barcode upper case and/or numeric
(required)
-h - Displays command usage information (optional)
addBarCodes
Returns a list of all the barcode templates (and their settings) that have been
defined. Displays each barcode template's name, prefix, start index, and suffix
length.
getBarCodes
Deletes the specified barcode template. Where the options are:
-a - Barcode prefix (required)
-f - Force. This parameter is ignored and is present only for backward
compatibility (optional)
-h - Displays command usage information (optional)
deleteBarCode
Gets cartridges by storage pool name. Where the options are:
-a - Storage pool name (StoragePool_#) (optional)
-h - Displays command usage information (optional)
getCartsBySP
Returns a list of available cartridge emulation types. Displays each cartridge
emulation's name, type, and capacity information. Where the options are:
-l - List only licensed types (optional)
-h - Displays command usage information (optional)
getCartTypes
Returns a list of available cartridge emulation types for the tape drive specified.
Displays each cartridge emulation's name, type, and capacity information. Where
the options are:
-a - Name of tape drive type (required)
-h - Displays command usage information (optional)
getCartTypesByTape
HP StorageWorks 6000–series Virtual Library System User Guide 205