HP XP Performance Advisor Software User Manual
Page 53
5.
Based on the disk array that you selected, following are the further course of steps:
If you selected an XP disk array and outband mode of configuration data collection:
•
Manually enter the SVP IP address in the SVP IP Address text box and proceed to next
step to initiate the configuration data collection.
If
you already registered the XP disk array SVP with the respective management station,
the
corresponding SVP IP address is displayed in the SVP IP Address text box. For more
information,
the XP or XP7 disk array SVP IP address in HP XP7
.
If
you selected an XP7 disk array and outband mode of configuration data collection:
•
The
corresponding SVP IP address and RWC user name and password are displayed in
the
respective text boxes, if you already saved these credentials in HP XP7 Performance
Advisor
for the selected XP7 disk array. For more information on saving credentials,
see
the XP or XP7 disk array SVP IP address in HP XP7 Performance
◦
If you have privileges to read the disk array configuration (minimum required - Storage
Admin role with View privilege), select the Authentication Enabled check box and
then proceed to next step to initiate the configuration collection. This authentication
is required to collect configuration data of the disk array. Before enabling
authentication, ensure that you first save the credentials in the Settings+Register SVP
IP/Save SVP Credentials section.
◦
If you do not want to enable the authentication, proceed to next step to initiate the
configuration collection. If the SVP IP address is not saved earlier, you can manually
enter the SVP IP address.
If authentication is required and you do not enable it, the configuration data collection will
fail.
6.
Click Submit.
HP
XP7 Performance Advisor starts collecting the configuration data for the XP/XP7 disk array
through
the selected command device. The Collection Status displays . After the configuration data
is
collected, the Collection Status displays . The Last Collection displays the updated time stamp
when
HP XP7 Performance Advisor completes receiving the latest configuration data.
Clicking Reset restores the default settings.
Related Topics
•
“Scheduling configuration data collection” (page 54)
•
“Deleting configuration data collection schedules” (page 57)
•
•
user-friendly names for XP and XP7 disk arrays” (page 76)
•
the XP or XP7 disk array SVP IP address in HP XP7 Performance Advisor” (page
•
“Filtering event records” (page 139)
•
“Configuring email and SNMP settings” (page 73)
•
“Starting real-time performance data collection” (page 320)
•
“Viewing performance summary” (page 177)
•
Collecting configuration data
53