HP XP Performance Advisor Software - Manual (Page 104)

Description Screen elements
HP XP7 Performance Advisor uses this value to verify whether
the average sequential I/Os on each RAID group is within or
beyond the set threshold limit.
If the average sequential I/Os on a RAID group exceeds the
defined threshold limit, the status icon appears.
The RG nonseq frontend reads (IOPS) threshold value indicates
the average non-sequential backend read tracks that you define RG NonSeq Reads (IOPS)
an individual RAID group can manage over the threshold
duration. HP XP7 Performance Advisor uses this value to verify
whether the average non-sequential I/Os on each RAID group
is within or beyond the set threshold limit.
If the average non-sequential I/Os on a RAID group exceeds
the defined threshold limit, the status icon appears.
The RG writes (IOPS) threshold value indicates the average
sequential backend write tracks that you define an individual RG Writes (IOPS)
RAID group can manage over the threshold duration. HP XP7
Performance Advisor uses this value to compare whether the
average writes (I/Os) on each RAID group is within or beyond
the set threshold limit.
If the average writes (I/Os) on a RAID group exceeds the defined
threshold limit, the status icon appears.
The RG utilization threshold value indicates the average overall
RAID group utilization that you define for an individual RAID RG Util (%)
group over the threshold duration. HP XP7 Performance Advisor
uses this value to verify whether the average overall RAID group
utilization of each RAID group is within or beyond the set
threshold limit.
The default threshold value is 50%.
If the utilization of one RAID group exceeds the defined
threshold, the status icon appears.
The DKA Util (%) threshold value indicates the average overall
utilization of the MPs that can be utilized on an installed DKA DKA Util (%)
over the threshold duration. HP XP7 Performance Advisor uses
this value to verify whether the average overall utilization of
each installed DKA is within or beyond the set threshold.
The default threshold value is 70%.
If the utilization of one exceeds the defined threshold limit, the
status icon appears.
NOTE: The DKA Util (%) metric is applicable for the DKA MPs
only on the XP disk arrays.
MP
Blade
If
any of the MP blades usage exceeds the defined threshold limit during the specified threshold duration for an MP blade met
ric,
the
status
icon appears in the MP Blade category in the XP/XP7Array Health section. For example, if the usage of an
MP
blade for the MP Blade Util (%) metric exceeds the defined threshold even once, the
status
icon appears.
The MP Blade Util (%) threshold value indicates the average
overall utilization of the MPs that can be utilized on an installed MP Blade Util (%)
MP blade over the threshold duration. HP XP7 Performance
Advisor uses this value to verify whether the average overall
utilization of each installed MP blade is within or beyond the
set threshold limit.
The default threshold value is 70%.
104
Monitoring performance of XP and XP7 disk arrays