Starting real-time performance data collection – HP XP Performance Advisor Software User Manual
Page 320
Description
Screen elements
real-time metrics in the Choose Metrics list.
•
The
associated host names are also populated in the
HostAgent
list. By default, the first host in this list is
associated
with the first XP or XP7 disk array
displayed
in the Select Components list.
You
can select the XP/XP7 disk array and related
components
for which you want to collect the real-time
performance
data.
Stop Collections tab
Displays
the XP and the XP7 disk arrays for which real-
time
performance data collection is in progress. You can
stop
a real-time data collection any time during the
collection
process.
HP XP7 Performance Advisor collects the real-time
performance data for the selected components and plots
performance graphs in the Chart Work Area.
Chart Work Area and chart options
Tasks you can perform on the RealTime screen
•
“Starting real-time performance data collection” (page 320)
•
“Stopping real-time performance data collection” (page 323)
Starting real-time performance data collection
Prerequisites
•
HP recommends that you dedicate a command device for the real-time performance data
collection, so that it is not used by HP XP7 Performance Advisor for the regular configuration
or performance data collection.
•
If
there have been configuration changes on the XP/XP7 disk array for which you want to
collect
the real-time performance data, the following informational message appears when
you
select components and start plotting the real-time graphs:
The
sync
with the configuration data available on Performance Advisor. This could occur due to
the
following reasons: Command device is invalid,
connected,
or selected components are not available on the selected array>. Perform the following steps to ensure that the same configuration data for the selected XP/ XP7 disk array is available on both the host agent real-time server and HP XP7 Advisor: 1. Request a host update. For more information, see “Requesting host agent updates” 2. Initiate the configuration data collection from HP XP7 Performance Advisor, so that the configuration data is available for the XP/XP7 disk array. For more information, 3. For the HP XP7 Performance Advisor host agent that is connected to the selected XP or XP7 disk array, update its real-time server with the latest configuration data of the XP/ XP7 disk array. Click Update RealTime Server on the RealTime screen for the host agent receive the latest configuration data. Updating the real-time server lasts for about 20 - 30 minutes and the following informational message appears after the update is complete: Real Time Server Configuration Collection update done for Hostagent. You can then 320 Troubleshooting issues for components associated with applications
Performance
latest
to
proceed with the real time data collection and plotting of charts.