HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 36)

Virtual Connect domains 36
• WARNING—The component has a potential problem.
• INFO—Operational information on the fully functioning component.
• UNKNOWN—VC Manager has not yet established communication with the component.
• NORMAL—The component is fully functional.
Trap severities are only supported for VC-Enet or VCM traps.
VC Module MIB traps
The following table lists traps in the VC Module MIB.
Trap name Trap data Description
vcModRoleChange moduleRole The VCM role of the module has changed.
vcModInputUtilizationUp port identification The input line utilization on a port has exceeded its
high-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.
vcModInputUtilizationDown port identification The input line utilization on a port has dropped below its
low-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.
vcModOutputUtilizationUp port identification The output line utilization on a port has exceeded its
high-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.
vcModOutputUtilizationDown port identification The output line utilization on a port has dropped below its
low-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.
vcModInputErrorsUp port identification
ifInErrors
The input error count on a port has exceeded its
high-water mark for longer than the error averaging
period. port is the index of the affected port in
ifTable.
vcModInputErrorsDown port identification
ifInErrors
The input error count on a port has dropped below its
low-water mark for longer than the error averaging
period. port is the index of the affected port in
ifTable.
vcModOutputErrorsUp port identification
ifOutErrors The output error count on a port has exceeded its
high-water mark for longer than the threshold averaging
period. port is the index of the affected port in
ifTable.
vcModOutputErrorsDown port identification
ifOutErrors The output error count on a port has dropped below its
low-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.
vcModPortBpduLoopDetected port identification
loop status
A network loop condition is detected on this port. If the
loop condition is detected on a Flex10 port, the trap data
indicates the physical port associated with the Flex10
port.
If multiple Flex10 ports on a physical port detect a loop
condition, a separate trap is sent for each occurrence of
the loop condition.