HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 22)

Virtual Connect domains 22
Domain Settings (Configuration) screen
Use this screen to change the domain name, delete a domain, configure and view auto-deployment, and
configure a customized login screen message. To access this screen, click Configuration in the left navigation
tree, or select Domain Settings from the Configure menu. Only users with domain role permissions can make
changes on this screen.
The following table describes the available actions in the Domain Settings (Configuration) screen. Clicking
another link in the pull-down menu or left navigation tree causes current edits that have not been applied to
be lost.
Task Action
Change the domain name Enter the revised domain name, and then click Apply.
Display single-dense server bays Click the checkbox next to the appropriate selection. Available if
double-dense compatibility is selected during import.
Delete a domain Verify that the correct domain name is displayed, and then click
Delete Domain. For more information, see "Deleting a domain (on
page 23 )."
Configure auto-deployment settings and
view auto-deployment status
For more information, see "Auto-deployment (on page 23 )."
Add banner text to the login screen Select the Enable Display of Banner on User Login checkbox, enter a
customized message in the Banner Text field (up to 1500 printable
ASCII characters in length), and then click Apply. Users are required
to acknowledge the banner text before they can log in.
Clear changes and remain on this screen Click Revert.
Save changes
Click Apply.