HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 252)

Virtual Connect modules 252
Pluggable Module Information* Description
ext-identifier Extended identifier for the type of serial transceiver. The values are
defined in SFF-8472 in the Extended Identifier [Address A0h, Byte 1]
field.
connector Connector type of the serial transceiver. The binary values are defined in
SFF-8472 in the Connector [Address A0h, Byte 2] field. This field displays
an ASCII representation of those binary values, such as “RJ45”.
vendor-name
Name of the manufacturer (not HP). This is defined in SFF-8472 in the SFP
Vendor Name [Address A0h, Bytes 20-35] field.
vendor-oui IEEE company ID of the manufacturer (not HP). This is defined in SFF-8472
in the Vendor OUI [Address A0h, Bytes 37-39] field.
vendor-part-number Manufacturer part number (not an HP part number). This is defined in
SFF-8472 in the Vendor OUI [Address A0h, Bytes 40-55] field.
vendor-revision Manufacturer part revision number (not an HP part revision number). This
is defined in SFF-8472 in the Vendor OUI [Address A0h, Bytes 56-59]
field.
*This information is only available for physical uplink ports. It is not available for Flex-10 subports.
FC Port Detailed Statistics screen
This screen provides details on Port Information and Port Statistics, and is available only on physical uplink
ports. Detailed statistics are not supported on FC interconnect modules. However, FC-capable ports do
support detailed statistics.
To reset the statistics, click Reset Statistics.