HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 136)

Virtual Connect networks 136
Use this screen to edit the properties of an existing shared uplink set, add an associated network, or delete
an associated network. This screen has the same fields as the Define Shared Uplink screen. The screen can
be edited only by users with network role permissions, but it is viewable by all authorized users.
The following table describes the fields within the Edit Shared Uplink Set screen.
For shared uplink sets using an FCoE associated network, the following restrictions apply:
• You cannot change the bay number. If you want to use a different bay number, you must delete the
FCoE network first, and then add a new one.
• If a shared uplink set is assigned to a profile, you cannot delete the FCoE network.
Field name Description
Ethernet Shared External Uplink
Set
Uplink Set Name Descriptive name for the shared uplink set. Do not use spaces.
External Uplink Ports
Port Enclosure, bay, and port number
Port Role Displays whether the port is designated as primary or secondary. For shared
uplink sets with an associated FCoE network, this is N/A.
Port Status
Shows the link status, link speed, and connectivity of the port.
• Linked-Active—There is a physical connection to a VC module and a