HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 278)

Maintenance and troubleshooting 278
VC displays cause and root cause information for domain status alerts. To view detailed information about
a device, click that device name in the list.
Module status definitions and causes
INCOMPATIBLE—Module is incompatible with the module in the horizontally adjacent bay.
UNKNOWN—Status is unknown.
The following table lists module status definitions and possible causes.
Status Possible cause Suggested action
UNKNOWN The module is not supported with this
version of VC:
• HP 4Gb VC-FC Module not supported
in VC 4.10 and higher
• HP 1/10 Gb not supported in VC
3.70 and higher
• HP 1/10 GB-F not supported in VC
3.70 and higher
Replace with a supported module.
INCOMPATIBLE The module is incompatible with the
module in the horizontally adjacent bay.
Be sure you have a valid configuration. See the
HP Virtual Connect for c-Class BladeSystem
Setup and Installation Guide on the HP website
( http://www.hp.com/go/vc/manuals ).
INCOMPATIBLE The module type is not supported by VC. Replace the module.