HP Integrity NonStop H-Series - Manual (Page 96)

Saving the Profile
Advanced Editing Features
058060 Tandem Computers Incorporated 4–11
Note If TEDIT does not break the line when you press RETURN , check with your TEDIT contact.
You may have a terminal on which the RETURN function is not available. If the RETURN
function is not available on your terminal, you can assign the BREAKLINE function to
another function key instead of to the
RETURN key. Then you simply press the
BREAKLINE function key when you reach the end of the line instead of the RETURN key.
The following example shows how to type BREAKLINE over the word WINDOW.
F5: paragraph
F6: BREAKLINE
F7: region
Type BREAKLINE over
WINDOW here.
6. Press *C to exit from the RECONFIGURE FUNCTION-KEYS screen.
Saving the Profile You should now save your LETTER profile so you can use it again. Saving
profiles was discussed in Section 3. Here is just a reminder. To save the
profile you just set up, follow these steps:
1. Press *C.
2. On the response line, type SAVEPROFILE.
3. When the response lines appear requesting a profile name, type
LETTER.
4. Press *C again. You have now saved the letter profile.