HP Integrity NonStop H-Series - Manual (Page 153)

Turning Off Auto Word Wrap When Using RETRIEVE
Working With Larger Files
6–4 058060 Tandem Computers Incorporated
To transfer the next file, AGENDA, into the DOCUMENT file, follow the
same steps as before:
1. Press *C.
2. This time give all the information on the *C response line that you gave
on the READ response lines in the previous example. Using *C you can
bypass the secondary READ response lines. In fact, you can use *C to
bypass most of the secondary response lines in TEDIT. Type the
information shown in the following example to read all the text from
the AGENDA file into the DOCUMENT file.
Command: READ AGENDA, ALL
3. Press *C again. The AGENDA file is now in the DOCUMENT file’s
scratchpad.
4. Go to the last line of the table. To locate the last line, scroll the text up.
You can scroll through the file one page at a time; every time you press
NEXT PAGE , TEDIT scrolls the text up by one page. You can scroll ahead
to the end of the file with SHIFT NEXT PAGE , which takes you to the last
page of the file. (To return to the first page of the file, press
SHIFT PREV PAGE .)
5. After you find the last line, press RETURN twice to leave a blank line
between the table and the agenda.
6. Press RETRIEVE. TEDIT retrieves the AGENDA file from the
scratchpad at the cursor position.
Use the same steps to transfer the LETTER file into the DOCUMENT file,
putting the letter at the end of the file. Now you should have copies of all
three files in the DOCUMENT file.