HP Integrity NonStop H-Series - Manual (Page 70)

The Options Part of the Profile
Customizing TEDIT for a Columned List
3–4 058060 Tandem Computers Incorporated
After you change the assignments, you save the new settings in another
profile; you can create and save as many profiles as you want. The default
profile is always available if you want to use it instead of one of your own.
Changing the profile is discussed here under “Setting the Tab Stops.”
Saving and reusing the profile is discussed at the end of this section under
“Saving and Using the Profile.”
Figure 3-1. The Options Part of the Profile (Page 1)
Profile * from $SYSTEM.SYSTEM.TEDPROFL, created 18JUN87.
Remarks: Standard Defaults
Align Width: 70 Auto Word Wrap: ON
Overlap (0-12): 2 Exit Confirmation: ON
Paragraph Lines: 6 Auto Renumber: ON
Printer Page Size: 0 RETURN Function: ON
Blank Fill on 3270: ON
Tab Stops (2-238): 9 17 25 33 41 49 57 65 73 81
Word Stops: " !""#$%&()*+,./:;<=>?@[\]_{|}~"
Sentence Stops: "!.?"
Format Stops: "!#%&')*+,-./:;<=>?@\]_`|}~"
SEARCH Options:
REPLACE Options:
OPENWINDOW Options:
Page 1 of 2
2. Use the arrow keys or the terminal keys for TAB and BACKTAB to move
around on the RECONFIGURE OPTIONS screen. If you use the RETURN
key, it might cause you to exit from the screen before you are ready.
When you press
TAB , TEDIT moves the cursor to the next place where
you can type something. Each place where you can enter information is
called a field. On the Tandem 6530 terminal, these fields are
highlighted. Move the cursor to the field marked “Tab Stops.”