NORD Drivesystems BU0505 - Manual (Page 76)

SK 54xE – Users Manual for Frequency Inverters
76 BU 0505 GB-1013
Availability of parameters
Due to certain configurations, the parameters are subject to certain conditions. The following tables list
all parameters together with the particular information.
1 Parameter number
2 Array values
3 Parameter text; Top: P-Box display, bottom: Meaning
4 Special features (e.g.: only available for SK 520E and above)
5 Supervisor parameters (S) are dependent on the settings in P003
6 Parameter set dependent (P) parameter selections in P100
7 Parameter value range
8 Description of the parameter
9 Default values (factory settings) of the parameter
Array parameter display
Some parameters have the option of displaying settings and views in
several levels (arrays). After the parameter is selected, the array level is
displayed and must then also be selected.
If the ControlBox is used, the array level is shown by _ - 0 1 . With the
ParameterBox (picture on right) the selection options for the array level
appear at the top left of the display.
For parameterisation with ControlBox SK TU3-CTR:
P 0 1 P50 2
P 0 2
OFF
OFF
Setting:
Master function value 1
Setting:
Master function value 2
ENTER ENTER
ENTER
VALUE
Pos : 97 /Anl eitungen/ 5. /6. Par ametrierung [ BU 0500 / BU 0200] /P0xx Betriebs anz eige @ 0\ mod_1327573414463_388. doc x @ 7339 @ 5 @ 1
Operating displays
Abbreviations used:
• FI = Frequency inverter
• SW = Software version, stored in P707.
• S = Supervisor parameters are visible or hidden depending on P003.