NORD Drivesystems BU0505 - Manual (Page 54)

SK 54xE – Users Manual for Frequency Inverters
54 BU 0505 GB-1013
Relevance
SK 540E SK 545E
√
Terminals X7: 73 74 26 27 5 7 44* 40 * Terminal 44:
up to Size 4: VI
Size 5 and
above: VO
RS485
+
RS485 - DIN6 DIN7 DOUT1 DOUT2 V…24V GND/0V
Name
Terminal Function
[factory setting]
Data Description / wiring suggestion Parameter
73
Data cable RS485
Baud rate
9600…38400Baud
Termination resistance
R=120
W
BUS connection parallel to RS485 on
RJ12 plug
NOTE: The termination resistance of
DIP switch 1 (see RJ12/RJ45) can also
be used for terminal 73/74.
P503
P509
74
26 Digital input 6
[no function]
7.5...30V, R
i
=3.3k
W
As described for terminal block X5, DIN1
to DIN5.
Not suitable for the evaluation of a motor
thermistor.
P420 [-06]
27 Digital input 7
[no function]
P420 [-07]
Alternatively:
Output 5 (DOUT3)
[no function]
Digital output
S1 to S4
18-30V, according to VI
24V, max. 20mA
size 5 and above
DOUT1 and DOUT2:
24V, max. 200mA
For inductive loads:
provide protection with a
free-wheeling diode.
The digital input (DIN7) can also be used
as a digital output (DOUT3).
If P434 [-05] and P420 [-07] are
parameterised with functions, a High
signal of the DOUT function results in a
High signal for the DIN function.
P434 [-05]
5 Output 3 (DOUT1)
[no function] For evaluation in a control system. The
scope of functions corresponds to that of
the relay (P434).
P434 [-03]
7 Output 4 (DOUT2)
[no function]
P434 [-04]
Alternatively:
Digital input 8
[no function] 7.5...30V, R
i
=3.3k
W
The digital output (DOUT2) can also be
used as a digital input (DIN3).
If P434 [-04] and P420 [-10] are
parameterised with functions, a High
signal of the DOUT function results in a
High signal for the DIN function.
P420 [-10]
44 Size 1 to Size 4
VI 24V supply
voltage input
18…30V
at least 800mA (input)
Voltage supply for the FI control unit. Is
essential for the function of the
frequency inverter.
Size 5 and above
VO 24V supply
voltage output
24V ± 25%
max. 200mA (output)
Supply voltage provided by the
frequency inverter for connection to the
digital inputs or the supply of a 10-30V
encoder.
The 24V control voltage is generated by
the FI, however it can also be supplied
via the terminals X12:44/40. Supply via
terminal X7:44 is not possible.
40 Reference potential
for digital signals
0V digital
Pos : 67 /Anl eitungen/ Elektroni k/FU und Start er/ 2. M ont age und Ins tall ati on/ 2. 10. 5 Elektrischer Ansc hluss St euert eil- Klemmenbl oc k X8 – Sic here Pulssperre [SK 54xE] @ 2\ mod_1355475452079_388.doc x @ 52210 @ 5 @ 1