NORD Drivesystems BU0505 - Manual (Page 134)

SK 54xE – Users Manual for Frequency Inverters
134 BU 0505 GB-1013
P550
Back up data record
(Back up data record)
0 ... 3
{ 0 }
Within the optional ControlBox it is possible to save a data set (parameter set 1 … 4) of the
connected FI. This is saved in a non-volatile memory within the Box, and can therefore be
transferred for other SK 5xxE units with the same database version (see P742).
0 = No change
1 = FI à ControlBox, the dataset is written from the connected FI to the ControlBox.
2 = ControlBox à FI, the dataset is written from the ControlBox to the connected FI.
3 = FI ßà ControlBox, the FI dataset is exchanged with the ControlBox dataset. With this
variant, no data is lost. It is continuously exchangeable.
NOTE: If parameterisation from old FI's need to be loaded into FIs with new software (P707),
then the ControlBox must previously be written to by the new FI (P550 = 1). The
dataset to be copied from the old FI can then be read out and copied to the new FI.
Pos : 314 /Anleit ungen/5. / 6. Parametrier ung [BU 0500 / BU 0200]/ Par ameter/ P500-P599/ Paramet er P551 – Antriebs profil @ 0\ mod_1328098517139_388. doc x @ 12054 @ @ 1
P551
Drive profile
(Drive profile)
S
0 … 1
{ 0 }
According to the option the relevant process data profiles can be activated with this parameter.
Note Activation of profiles
This parameter is only effective for pluggable technology modules (SK TU3-…).
System CANopen DeviceNet InterBus
Technology module SK TUx-CAO SK TUx-DEV SK TUx-IBS
Setting
0 = OFF = USS protocol (Profile "Nord")
1 = ON = DS402 profile AC Drives profile Drivecom profile
Pos : 315 /Anleit ungen/5. / 6. Parametrier ung [BU 0500 / BU 0200]/ Par ameter/ P500-P599/ Paramet er P552 – C AN M ast er Z ykl usz eit @ 0\ mod_1328098574264_388. doc x @ 12077 @ @ 1