West Control Solutions Pro-EC44 - Manual (Page 50)

Pro-EC44 2-Loop Graphical Profile Controller & Recorder
Pro-EC44 Product Manual - 59540-1 October 2013 Page 43
Setup Wizard
An easy Setup Wizard runs automatically at first ever power-up. Follow the Wizard to setup
parameters required for basic applications. The parameters covered by the Setup Wizard are
marked with a w in the following sections covering the configuration mode sub-menus. Once
completed, the Setup Wizard exits to Operation Mode.
The Wizard can be run again at any time from the Main Menu. An option to reset all
parameters to default (recommended) is offered when manually running the wizard.
CAUTION: Resetting defaults all parameters, not just those covered by the
quick setup wizard. For more complex applications the user may have to
reconfigure other Configuration Menu settings before using the instrument.
Experts or users with more complex applications can select the parameters they wish to set-
up directly from the Configuration Menus bypassing the Wizard.
Manual entry to the Setup Wizard
To select the Setup Wizard from the Main Menu.
Hold down
R
and press
U
to enter the Main Menu.
Press
D
or
U
to select Setup Wizard.
Press
R
to enter the Setup Wizard.
Navigating in the Setup Wizard
Press
R
to move forward, or
L
to move backwards through the screens.
Press
D
or
U
to change the value as required.
Holding down
R
or
L
for more than 1 second skips immediately to the next/previous
screen accepting ALL values as shown.
Hold down
R
and press
U
to return to the Main Menu
Scrolling “Help Text” is shown at the bottom of the screens to aid navigation.
 SETUP WIZARD SCREENS
Setup Wizard
Unlocking w Enter correct code number to access Setup Wizard.
Factory Default value is 10.
- key screens from
Configuration Menu
(those marked w) w Press R to select each major configuration parameter in turn. Follow on-
screen prompts to alter the values.
Setup Wizard
Completed w Confirms completion of the Setup Wizard. Exits to Operation Mode.
Note: With the exception of the first ever power-up, entry into this mode is
security-protected by the Setup Wizard Lock Code. Refer to the Lock Code
Configuration sub-menu.