beautypg.com

Data recorder board, Profiler enabling, Entering the profiler enable code – West Control Solutions Pro-EC44 User Manual

Page 15

background image

Pro-EC44 2-Loop Graphical Profile Controller & Recorder

Pro-EC44 Product Manual - 59540-1 October 2013

Page 8

Data Recorder Board

If installed, the Data Recorder memory and Real Time Clock (RTC) components are located
on a plug-in daughter board attached to the front Display/CPU board.

CAUTION:

Servicing of the Data Recorder/RTC circuit and replacement of

the lithium battery should only be carried out by a technically competent
technician.

Profiler Enabling

If you purchased a controller with the Profiler option installed, these features will be enabled
during manufacture.
Controllers supplied without the Profiler option installed can be upgraded in the field by
purchasing a licence code number from your supplier. A unique code must be purchased to
enable profiling on each controller that requires it.

Entering the Profiler Enable Code

Hold down the

L

and

D

keys during the power-

up “splash screen”.

Using the

D

or

U

keys, enter the 16-character licence code in the displayed screen.

Press

R

to move on to the next character. Press

L

to move back to the previous

character.

Press

R

after entering the final character.

To confirm if profiling is installed in your instrument, check the Controller Feature Information
in Product & Service Information Mode.

This manual is related to the following products: