ZOLL X Series Monitor Defibrillator Rev H - Manual (Page 53)

Defibrillator Controls and Indicators
9650-001355-01 Rev. H X Series Operator’s Guide 2–13
Pediatric-size electrodes are built in to the paddle assembly beneath the standard electrode
plates. The user must manually adjust energy settings to pediatric levels consistent with their
institution’s protocols.
Figure 2-12. Pediatric Plate
Note: The X Series defibrillator also supports ZOLL autoclavable internal handles for use
during open chest defibrillation procedures.
AC Auxiliary Power Adapter
The AC auxiliary power adapter is used as backup power to operate the X Series unit. When it
is connected to the unit, it powers the unit and charges the battery that is installed inside it.
When the power cord is plugged in and the auxiliary power connector is inserted into the back
of the X Series unit, the auxiliary power LED on the front panel illuminates and the auxiliary
power icon (
) displays at the top of the display screen. See “Connecting the AC Auxiliary
Power Adapter or DC Auxiliary Power Supply” on page 2-15 for instructions on connecting the
adapter to the X Series unit.
Figure 2-13. AC Auxiliary Power Adapter
Caution To ensure continuous operation, always keep a battery installed in the device that is being
powered by the AC Auxiliary Power Adapter.
To expose the pediatric plate, press the PEDI button at
the top of the paddle, then slide the Adult plate upward.
Before replacing the Adult plate, be sure to clean the
pediatric plate and surrounding area thoroughly.
Slide the Adult plate onto the paddle until it locks into
place.
PEDI button