ZOLL X Series Monitor Defibrillator Rev H - Manual (Page 267)

Sending a 12-lead report
9650-001355-01 Rev. H X Series Operator’s Guide 22–23
Configuring Report Transmissions
The X Series unit can send 12-lead reports to the ZOLL RescueNet software. Distribution List
entries defined in your RescueNet account specify possible report destinations, each of which
consists of one or many recipients such as email addresses and fax machines. You must have a
RescueNet account set up before you can complete configuration of the X-Series device.
In the Communications menu, select Reports Configure.
Enter your RescueNet Customer ID and Password in the fields provided.
Before you can transmit 12-lead reports, you must download the current Distribution List for
your account from the RescueNet server. If you have already configured your wireless
preferences, you can use the Update Distribution List button to complete the download.
The X-Series retains the current Distribution List until a new one is downloaded. If you modify
the Distribution List entries using RescueNet, you should download a new copy to the X Series
device.
Sending a 12-lead report
When a 12-lead report has been acquired or a previously acquired 12-lead has been selected for
review, the X Series unit prepares the report for transmission. When this is complete, the
Transmit quick access key(
) displays.
To send a 12-lead report to a preconfigured distribution list:
1. Press the 12-lead quick access key( ).
2. If desired, press the snapshot button( ) to take a 12-lead snapshot (see Chapter 14: 12-Lead
ECG Interpretive Analysis for more information about acquiring 12-lead data).
3. Press the 12-lead review next quick access key ( ). A list of snapshots appears; select the
desired snapshot.