ZOLL X Series Monitor Defibrillator Rev H - Manual (Page 44)

C HAPTER 2 P RODUCT O VERVIEW
2–4 www.zoll.com 9650-001355-01 Rev. H
Display Screen
The front panel includes a color display which shows:
• Date and time
• Patient mode
• Battery status indicator
• Time elapsed (since unit was turned on)
• Quick access keys
• Waveform source
• Color-coded waveforms and ECG lead identifiers
• SpO
2
numeric data
• Heart rate numeric data
• Respiration rate numeric data
• Temperature numeric data
Navigation keys
The up (clockwise) arrow will cause the cursor to travel in an
upward direction if the cursor is being used to navigate through a
vertical list or in a clockwise direction if the cursor is being used to
navigate around the full screen. Likewise, the down (counterclockwise)
arrow will cause the cursor to travel in a downward direction if the cursor
is being used to navigate through a vertical list or in a counterclockwise
direction if the cursor is being used to navigate around the full screen.
The up (clockwise) and down (counterclockwise) arrows may also be
used to modify parameter settings.
The Select button acts based on what is highlighted.
Display/Home button Cycles through three available display modes or functions as a Home
button when in a menu.
Silence/Reset button Silences the current alarm tone for 90 seconds or resets a silenced
alarm tone.
RFU indicator Shows the status of the unit, based on its most recent readiness check.
A red circle with a line through it indicates that the unit’s readiness has
been compromised and that it may not be ready for therapeutic use.
Power button Located on the top of the unit, this button turns the unit on and off.
Microphone (optional) Records audio activity in the vicinity of the X Series unit.
Charge Indicator Light
(not shown) Located on the APEX paddle, this light turns on when the defibrillator is
charged and ready.
Table 2-2. X Series Controls and Indicators (continued)
Control or Indicator Description
Ready Do Not Use