beautypg.com

Connecting the nibp cuff – ZOLL X Series Monitor Defibrillator Rev H User Manual

Page 111

background image

Connecting the NIBP Cuff

9650-001355-01 Rev. H

X Series Operator’s Guide

8-5

Connecting the NIBP Cuff

Connecting the NIBP cuff requires you to attach the inflation hose to the X Series unit and the
NIBP cuff. To use the SureBP feature, which enables the X Series unit to measure blood
pressure on cuff inflation, you must use the FlexiPort cuff and dual lumen (two-tube) adaptor
and hose. You can also use a single lumen (one-tube) hose and adaptor with the X Series unit,
but the unit will only measure blood pressure on cuff deflation.

To connect the NIBP cuff to the X Series unit:

1. Attach the inflation hose’s threaded metal connector to the NIBP connector on the side

panel of the X Series unit. Mesh the threads carefully so that the connector turns easily and
then turn the connector in a clockwise direction until it is snug. Attach a double lumen hose
as follows:

Figure 8-1 Attaching a Dual Lumen Hose to the X Series Unit