beautypg.com

Communications system messages – ZOLL X Series Monitor Defibrillator Rev H User Manual

Page 269

background image

Communications System Messages

9650-001355-01 Rev. H

X Series Operator’s Guide

22–25

Communications System Messages

The X Series unit may display one of the following status messages during the transmission:

System Message

Cause

TRYING TO CONNECT TO
NETWORK

The unit is connecting to the network.

TRYING TO CONNECT TO
SERVER

The unit is connecting to the ZOLL server.

TRANSMITTING

The data transfer is in progress

TRANSMISSION COMPLETE

The data transfer is complete.

TRANSMISSION FAILED

The data transfer has failed.

To correct the problem, check the following:

Verify that wireless communications is enabled
on your X Series unit.

Verify that the WiFi settings are correct in the
Communications setup menu.

Verify that the ZOLL server is configured
correctly.

Verify that your cellular device is configured
correctly.

Make sure that the X Series unit is within range of
the wireless server.