2 quick reference: two-wire connection to tempest, Quick reference: two-wire connection to tempest, Two-wire connection to tempest – Clear-Com HLI-FBS User Manual
Page 96
9.3.2 Quick reference: Two-wire connection to Tempest
Figure 19: Two-wire connection to Tempest
HMS-4X Main Station 2W
Power
supply
Or
Encore Main Station
(MS-70x)
Tempest Basestation
Standard mic cable / CAT-5
3-pin XLR connectors
Line must be powered (HMS-4X 2W
module appears as unpowered
beltpack / remote station to Tempest).
Configure the 2W module
Configure the port as Clear-Com
Enable auto-nulling
2W
Select Clear-Com as the intercom type
Select the connected channel (A or B)
Select 2W mode
Enable auto-nulling
Two-wire connection to Tempest
94
HelixNet Partyline User Guide