Clear-Com HLI-FBS - Manual (Page 67)

5.6.4 Configuring the Module Settings: Version information
The software (firmware) for the ports on the interface module must match that on the HelixNet Main
Station itself.
To check the software version for the Main Station and each port on the interface module:
1. In Menu mode [ ], select Administration > Software > Current.
2. In the fourth menu (display screen), use the rotary control [ ] to scroll the displayed software
versions.
3. The software versions for each port are listed under Snx, where n indicates the slot number, and
x indicates port A or port B.
The software versions for the Main Station and the IV-Router are listed under MS and IVR
respectively.
5.7 Administration
In Menu mode [ ] > Administration, you can:
• View the current versions of the software for the system.
• Update the software (firmware).
• Lock or unlock the menus on HBP-2X beltpacks connected to the main station.
• Reset the Main Station to the default (factory mode) settings.
• Manually reboot the Main Station.
• Save and Restore the software settings.
5.7.1 Viewing the current versions of the software
To view the current versions of the software on the Main Station:
1. In Menu mode [ ], select Administration and then Software.
2. From the third menu (display screen), select Current.
3. In the fourth menu (display screen), use the rotary control [ ] to scroll the displayed software
versions.
The software versions for each port are listed under Snx, where n indicates the slot number, and
x indicates port A or port B.
The software versions for the Main Station and the IV-Router are listed under MS and IVR
respectively.
65 HelixNet Partyline User Guide