Clear-Com HLI-FBS - Manual (Page 69)

5.7.3 Locking and unlocking the HBP-2X beltpack menus
You can prevent beltpack users from changing the menu settings on connected HBP-2X beltpacks by
locking the menus. Unlock the beltpack menus to allow users to change the beltpack menu settings.
To lock (or unlock) the HBP-2X beltpack menus from the Main Station:
1. In Menu mode [ ], select Administration and then Beltpacks.
2. The third menu (display screen) displays a single, selected menu item: Menu Lock.
In the fourth menu (fourth display screen), select either of the following:
• Unlock All
• Lock All
3. To enable (confirm) the selected setting, press the rotary control [ ].
5.7.4 Resetting the Main Station to default (factory mode) settings.
To reset the Main Station to its default (factory mode) settings:
1. In Menu mode [ ], select Administration and then Reset.
2. The third menu (display screen) displays a selected menu item: Reset to Default.
3. In the fourth menu (fourth display screen), select between:
• Reset HMS
• Reset HBPs
• Reset All
The beltpacks will receive updated (default) channel label information. All other local beltpack settings will
not be reset if the Main Station is reset to default settings.
5.7.5 Manually rebooting the Main Station
To manually reboot the Main Station:
1. In Menu mode [ ], select Administration and then Reset.
2. The third menu (display screen) select Reboot.
3. In the fourth menu (fourth display screen), select Reboot Now.
When the rotary control [ ] is pressed, the display changes to Rebooting … for 2 seconds, and then
the Main Station reboots.
67 HelixNet Partyline User Guide