Clear-Com HLI-FBS - Manual (Page 82)

7 Using the HMS-4X Main
Station
This chapter describes how to use the HMS-4X Main Station, after your HelixNet Partyline system has
been installed and configured.
For more information about integrating and using HelixNet Partyline with your existing intercom
infrastructure, see 3 Installing HelixNet Partyline.
Tip: For a quick reference to the functionality of the HMS-4X Main Station, the optional interface modules
and the HBP-2X Beltpack, see 2 User Interfaces.
7.1 Using the gooseneck mic, loudspeaker and headset
To use a gooseneck mic [ ] to talk to connected intercom users, devices (including HBP-2X
beltpacks) and systems:
1. Connect the gooseneck mic, using the gooseneck mic connector (3-pin female Tuchel connector)
on the left of the front panel.
Note:
For the location of the gooseneck mic connector, see
C
in
Table 4: Key to HMS-4X Main Station front panel diagram.
2. To talk to other intercom users and devices:
a. Press the appropriate Talk key [ ].
When the mic (gooseneck or headset) is live, the Mic On key [ ] is activated
automatically.
b. Speak into the mic.
Use the front panel loudspeaker [ ] to listen to connected intercom users, devices and the
Program Feed.
To adjust the volume level:
1. Adjust the volume of all incoming audio by turning the loudspeaker rotary control [Main]
[ ], located to the left of the loudspeaker.
80 HelixNet Partyline User Guide