Clear-Com HLI-FBS - Manual (Page 55)

5.3.7 Setting the screensaver
The screensaver features the channel label and is enabled by default. The display screens enter
screensaver mode when the main station has been inactive for 10 minutes.
Tip: To exit screensaver mode, press any key on the front panel.
To enable or disable the screensaver:
1. In Menu mode [ ], select Station Settings and then Display.
2. From the third menu (third display screen), select Screensaver.
3. From the fourth menu (fourth display screen), select either:
• Enabled
• Disabled
Note:
The default is Enabled.
4. To enable (confirm) the selected setting, press the rotary control [ ].
5.4 Configuring the channel settings
5.4.1 Editing the channel label
The maximum length for a channel label is 10 characters. See 4.1.7 Resource Sharing between
Linked Stations for an explanation of how identical labels are treated when Main Stations are linked. To
edit the channel label:
1. In Menu mode [ ], select Channels and then the name of the channel you want to edit (for
example, ).
2. From the third menu (third display screen), select Label.
3. Select Clear and press the rotary control to clear the channel label.
4. In the fourth menu (fourth dislay screen), the following prompt is displayed above the channel
label:
[Press to Edit]
Press the rotary control [ ].
5. The first letter of the channel label is shown as selected [ ]. The following prompt is
displayed above the channel label:
[Scroll / Press to Select]
Scroll to the character you want to edit by turning the rotary control [ ]. To begin editing,
press the rotary control [ ].
53 HelixNet Partyline User Guide