Clear-Com HLI-FBS - Manual (Page 48)

3. To limit the peaks in audio on the headphones (or to disable headphone limiting):
a. In the third menu (third display screen), select Headphone Limit.
b. In the fourth menu (fourth display screen), select one of the following:
• Off
• +6dB
• 0dB
• - 6dB
Note:
The default is 0dB.
c. To enable (confirm) the selected setting, press the rotary control [ ].
Note:
When Headphone Limit is set to anything but Off, a LIM indication will show up on the leftmost display.
Note:
Limiting peaks in audio can help to prevent distortion on the headphone microphone.
4. To set (or disable) sidetone tracking on the headset:
a. In the third menu (third display screen), select Sidetone Control.
b. In the fourth menu (fourth display screen), select one of the following:
• Tracking - The sidetone volume will follow (track) the Main volume level.
• Non-Tracking - The sidetone volume is set to maximum.
• Disabled - Sidetone is disabled.
Note:
The default is Tracking.
c. To enable (confirm) the selected setting, press the rotary control [ ].
5. To select the type of microphone on the headset:
a. In the third menu (third display screen), select HS Mic Type.
Note:
HS = Headset.
b. In the fourth menu (fourth display screen), select either of the following types of
microphone:
• Electret (-15dB)
• Dynamic (0dB)
• Dynamic (-10 dB)
Note:
The default is Dynamic.
c. To enable (confirm) the selected setting, press the rotary control [ ].
46 HelixNet Partyline User Guide