Clear-Com HLI-FBS - Manual (Page 89)

9 Connecting to Other
Intercom Systems
This chapter provides basic guidance on connecting your HelixNet Partyline system to a range of other
intercom systems, including:
• Two-wire cabled partyline systems (RTS and Clear-Com Encore).
• Two-wire / four-wire wireless systems (Tempest, CellCom / FreeSpeak, and the DX210).
• Digital matrix systems (Eclipse MVX four-wire).
The HMX-4X Main Station is connected to these systems using the optional Two-wire and Four-wire
interface modules.
Note:
Future versions (upgrades) of the HelixNet Partyline software will also enable Ethernet and
Fiber Channel interface modules in HelixNet Partyline software. For more information, see
2.2.1 HMS-4X Main Station rear panel: Interface modules.
9.1 Connecting HelixNet Partyline to Encore
9.1.1 About Encore
Encore is the plug-and-play analog two-wire partyline system from Clear-Com.
Clear-Com Encore is widely used in theatres, schools, local broadcast stations, churches and other small
to mid-size live productions.
Two and four channel versions of the Main Stations and remote stations are available.
Tip: For more information about Encore, see your Encore documentation or visit the
Intercom Partyline pages on the Clear-Com website: http://www.clearcom.com/product/partyline .
87 HelixNet Partyline User Guide