Clear-Com HLI-FBS - Manual (Page 27)

2.3.3 HBP-2X beltclip, beltloops and feet (base view)
Figure 7: HBP-2X Beltpack: base view
Key to HBP-2X Beltpack (Base view)
Feature Description
A
Beltclip. The beltclip is secured to the unit with three screws, and may be removed,
according to your requirements. Use the beltclip to attach the beltpack to a belt or a
fixed position.
B
Feet (positions only). The beltpack can also be placed on a level surface (once the
beltclip has been removed). To give the beltpack more grip on the surface, attach the
four rubber feet supplied with the beltpack.
C
Beltloops (one either side). Use to thread through a belt or strap for securing the
beltpack to a belt or a fixed position.
Table 23: Key to HBP-2X Beltclip, beltloops and feet ( base view)
27 HelixNet Partyline User Guide