Clear-Com HLI-FBS - Manual (Page 75)

4. To limit the peaks in audio on the headphones (or to disable headphone limiting):
a. Select Headphone Limit.
b. Select one of the following:
• Off
• +6dB
• 0dB
• - 6dB
Note:
The default is 0dB.
c. To enable (confirm) the selected setting, press the right-hand Call key [ ].
Note:
Limiting peaks in audio can help to prevent distortion on the headphone mic.
Note:
When Headphone Limit is set to anything except Off, a LIM indication will show up at the top right
of the display
5. Go back to the previous menu level by pressing the left-hand Call key [ ].
6. To set (or disable) sidetone tracking on the headset:
a. Select Sidetone Control.
b. Select one of the following:
• Tracking
• Non-Tracking
• Disabled
Note:
The default is Tracking.
c. To enable (confirm) the selected setting, press the right-hand Call key [ ].
7. Go back to the previous menu level by pressing the left-hand Call key [ ].
8. To set the type of mic on the headset:
a. Select HS Mic Type.
b. Select either of the following types of mic.
• Electret (-15 dB)
• Dynamic (0 dB)
• Dynamic (-10 dB)
Note:
The default is Dynamic (0 dB).
c. To enable (confirm) the selected setting, press the right-hand Call key [ ].
73 HelixNet Partyline User Guide