beautypg.com

Clear-Com HLI-FBS User Manual

Page 24

background image

Key to HBP-2X user controls (front and side view)

Feature

Description

A

Menu key. Press firmly to enter Menu mode (see also

D

F

). To exit Menu mode,

press the Menu key again.

Note:

The display screen times out of Menu mode and displays the channel label(s) if no key
is pressed for 20 seconds.

B

USB 2.0 (Micro-AB) connector. For software upgrades.

C

Casing. Metal casing for robust use. For information about the beltclip, beltloops, and
feet, see 2.3.3 HBP-2X beltclip, beltloops and feet (base view).

Keyset

D

Rotary control. Turn to increase and decrease the listen volume level for the channel.

In Menu mode, you can turn either of the side-mounted rotary controls to scroll menu

items. To select (enter) items, press the right-hand Call key (see

F

).

E

Talk key. Press to talk to all nodes (intercom devices and systems) listening into the
channel. There are two Talk keys on the beltpack, one for each of the supported
channels.

F

Call key. Press and hold for half a second to send a call signal to all nodes (intercom
devices and systems) listening into the channel. There are two Call keys on the
beltpack, one for each of the supported channels.

In Menu mode, press the right-hand Call key to select (enter) menu items

(see also

A

D

). Use the left-hand Call key to go back one menu level.

G

Display screen. When the beltpack is not in Menu mode, the labels and volume level
for each of the two channels supported by the beltpack are displayed on screen.

Table 17: Key to HBP-2X Beltpack main controls (front and side view)


24

HelixNet Partyline User Guide

This manual is related to the following products: