Clear-Com HLI-FBS - Manual (Page 63)

Note:
For detailed pinout information, see
2.2.1 HMS-4X Main Station rear panel: Interface modules.
To configure the port for either Clear-Com or RTS systems:
a. From the third menu (third display screen), select Mode.
b. From the fourth menu (fourth display screen), select one of the following:
• Clear-Com
• RTS Audio Pin 2
• RTS Audio Pin 3
c. To enable (confirm) the selected setting, press the rotary control [ ].
7. To set the Input Gain:
a. From the third menu (third display screen), select Input Gain.
b. From the fourth menu (fourth display screen), select one of the following:
• +3 dB
• +2 dB
• +1 dB
• 0 dB
• -1 dB
• -2 dB
• -3 dB
Note:
The default is 0 dB.
8. To set the Output Gain:
a. From the third menu (third display screen), select Output Gain.
b. From the fourth menu (fourth display screen), select one of the following:
• +3 dB
• +2 dB
• +1 dB
• 0 dB
• -1 dB
• -2 dB
• -3 dB
Note:
The default is 0 dB.
61 HelixNet Partyline User Guide