Clear-Com HLI-FBS - Manual (Page 58)

5.5.2 Configuring Relay outputs
To configure the Control I/O for Relay outputs:
1. In Menu mode [ ], select Control I/O.
2. From the second menu (second display screen), select Outputs.
3. From the third menu (third display screen), select one of the four available Relay outputs:
• Relay 1
• Relay 2
• Relay 3
• Relay 4
4. From the fourth menu (fourth display screen), select one of the following:
• None
• Call Key 1
• Talk Key 1
• Call Key 2
• Talk Key 2
• Call Key 3
• Talk Key 3
• Call Key 4
• Talk Key 4
• SA Key
Note:
The number of the key relates to the keyset to which it belongs (for example, Call Key 1 is the
Call key for the first keyset / display screen).
The default setting is None.
5. To enable (confirm) the selected setting, press the rotary control [ ].
5.6 Configuring Module Settings
Up to three optional interface modules (of the same or different types) can be fitted to the expansion bay
of the HMS-4X Main Station.
Warning: The interface modules are not hot pluggable. Ensure that the Main Station is powered down
before inserting or removing modules.
The Menu mode [ ] > Module Settings are used to set up the devices connected to the interface
modules.
Tip: For more detailed information about interface modules, including pin out information, see:
2.2.1 HMS-4X Main Station rear panel: Interface modules.
56 HelixNet Partyline User Guide