6 audio settings for the hot mic output, 7 audio settings for the front panel, Audio settings for the hot mic output – Clear-Com HLI-FBS User Manual

Page 51: Audio settings for the front panel

5.2.6 Audio settings for the Hot Mic Output

To configure the audio settings for the Hot Mic Output:

1. In Menu mode [ ], select Audio Settings and then Hot Mic Ouput.

2. From the third menu (third display screen), select Gain.

3. From the fourth menu (fourth display screen), select one of the following:

• + 12dB

• + 6dB

• 0dB

• - 6dB

• -12dB

Note:

The default is 0.

4. To enable (confirm) the selected setting, press the rotary control [ ].

5.2.7 Audio settings for the Front Panel

To configure the audio settings for the Front Panel:

5. In Menu mode [ ], select Audio Settings and then Front Panel.

6. From the third menu (third display screen), select Loudspeaker Dim.

7. From the fourth menu (fourth display screen), select one of the following:

• 0 dB

• -3 dB

• -6 dB

• -12 dB

• -24 dB

Note:

The default is -6 dB.

8. To enable (confirm) the selected setting, press the rotary control [ ].

HelixNet Partyline User Guide

This manual is related to the following products: