2 exiting menu mode, 2 configuring the audio settings, 1 audio settings for the headset – Clear-Com HLI-FBS User Manual
Page 47: Exiting menu mode, Configuring the audio settings, Audio settings for the headset
5.1.2 Exiting Menu mode
To exit Menu mode, do either of the following:
• Press the Menu key [ ].
• Wait until Menu mode times out. If you fail to press any key on the front panel for 20 seconds, the
display screens revert to showing the standard channel information:
• Channel label (name) [ ].
• Listen level (volume) [ ].
5.2 Configuring the Audio settings
5.2.1 Audio settings for the headset
To configure the audio settings for the headset:
1. In Menu mode [ ], select Audio Settings and then Headset.
2. To adjust the level of sidetone on the headset:
a. In the third menu (third display screen), select Sidetone Gain.
b. In the fourth menu (fourth display screen), select one of the following:
• 0dB
• - 6dB
• - 12dB
• - 18dB
Note:
The default is -12dB.
c. To enable (confirm) the selected setting, press the rotary control [ ].
45
HelixNet Partyline User Guide