5 four-wire connection to eclipse, Four-wire connection to eclipse – Clear-Com HLI-FBS User Manual

Page 116

9.6.5 Four-wire connection to Eclipse

To connect your HelixNet Partyline system to an Eclipse Median, using a four-wire connection:

1. On the HMS-4X Main Station, configure the Module Settings for the four-wire interface module

2. Connect the HMS-4X Main Station directly to the MVX-A16 card (the 16 port audio and data card

set) with standard CAT5 cable.

Important note:

For pinout information for the two systems, see the quick reference diagram in
9.6.4 Quick reference: Four-wire connection to Eclipse.

RJ45 connectors are located:

• On the HMS-4X Main Station four-wire interface module.

• On the rear panel of the MVX-A16 card.

Tip:

To optimize audio quality, you may want to adjust the Audio Settings on the

HMS-4X Main Station. For more information, see 5.2 Configuring the Audio settings

Tip:

For more information about managing the HelixNet to Eclipse connection in ECS, see your

ECS documentation (including ECS Help).

114

HelixNet Partyline User Guide

This manual is related to the following products: