Clear-Com HLI-FBS - Manual (Page 50)

5.2.4 Audio settings for Program IFB [Interruptible Foldback]
IFB allows you to temporarily interrupt the continuous program listen (program feed) and speak to the
channels connected to the program listen.
See also 5.4.2 Assigning the Program Listen to a channel.
To configure the audio settings for Program IFB [Interruptible Foldback]:
1. In Menu mode [ ], select Audio Settings and then Program IFB.
2. From the third menu (third display screen), select IFB Dim Level.
Note:
The IFB Dim Level determines the volume level the Program Level is reduced to when it is
interrupted by the IFB.
3. From the fourth menu (fourth display screen), select one of the following:
• IFB Disabled
• - 6dB
• -12dB
• -18dB
• -24dB
• Full Cut
Note:
The default is IFB Disabled.
4. To enable (confirm) the selected setting, press the rotary control [ ].
5.2.5 Audio settings for the SA [Stage Announce] Output
To configure the audio settings for the SA [Stage Announce] Output:
1. In Menu mode [ ], select Audio Settings and then SA Output.
2. From the third menu (third display screen), select Gain.
3. From the fourth menu (fourth display screen), select one of the following:
• + 12dB
• + 6dB
• 0dB
• - 6dB
• - 12dB
Note:
The default is 0.
4. To enable (confirm) the selected setting, press the rotary control [ ].
48 HelixNet Partyline User Guide