Clear-Com HLI-FBS - Manual (Page 86)

7.4 Using the All Talk key
To talk to all connected intercom users, devices and systems, excluding the SA (Stage Announce)
facility:
1. Press the All Talk key [ ] to the right of the fourth (last) display screen.
Talk keys [ ] for all channels are activated automatically.
When the mic (gooseneck or headset) is live, the Mic On key [ ] is also activated
automatically.
2. Speak into the headset or gooseneck mic
(see also 7.1 Using the gooseneck mic, loudspeaker and headset ).
7.5 Using the SA [Stage Announce] key
Use the SA [Stage Announce] key [ ] to speak to an attached SA or PA (Public Announce) system
(sometimes simply a loudspeaker within the studio, theater or event area).To make a studio / public
announcement:
1. Press the SA key [ ] to the right of the fourth (last) display screen.
When the mic (gooseneck or headset) is live, the Mic On key [ ] is also activated
automatically.
2. Speak into the headset or gooseneck mic (see also
7.1 Using the gooseneck mic, loudspeaker and headset ).
7.6 Using the RMK [Remote Mic Kill ] key
Use the RMK [Remote Mic Kill ] key [ ] to:
• Send a message to all connected HelixNet Partyline beltpacks) to deselect any latched
(active)Talk keys [ ].
• Turn off any latched Talk keys on connected analog partyline beltpacks.
7.7 Line 1 and 2 LEDs
The HBP-2X beltpacks are connected (and powered) by two lines to the Main Station. Each line can
support up to 10 beltpacks.
The color of the Line 1 and Line 2 LEDs [ ] to the left of the front panel loudspeaker indicate the
service status of each powerline:
•
Green LED = Ok.
•
Amber LED = Busy.
•
Red LED = Error.
For more information:
• About the service status of Lines 1 and 2, see 5.8.3 Viewing powerline information and status.
• About monitoring system performance and diagnosing system issues on the Main Station, see
5.8 Diagnostics.
84 HelixNet Partyline User Guide