Clear-Com HLI-FBS - Manual (Page 77)

6.4.1 Assigning channels
You can assign any two of the four available channels to the beltpack (including the same channel to both
keysets).
To assign a channel to the left-hand keyset (set of controls):
1. In Beltpack Settings select Left Channel.
2. Select one of the four available channels (or none):
• None.
• Channel A
• Channel B
• Channel C
• Channel D
Note:
More that four channels will be available when Main Stations are linked.
Note:
The default channel labels (names) are shown above. The channel labels (names) can be edited
on the Main Station. See 5.4.1 Editing the channel label.
3. To enable (confirm) the selected setting, press the right-hand Call key [ ].
To assign a channel to the right-hand keyset (set of controls):
1. In Beltpack Settings select Left Channel.
2. Select Right Channel.
3. Select one of the four available channels (or none):
• None
• Channel A
• Channel B
• Channel C
• Channel D
Note:
More that four channels will be available when Main Stations are linked.
Note:
The default channel labels (names) are shown above. The channel labels (names) can be edited
on the Main Station. See 5.4.1 Editing the channel label.
4. To enable (confirm) the selected setting, press the right-hand Call key [ ].
75 HelixNet Partyline User Guide